The appropriate modules for your measurement task

The PME range of products offer different types of modules for recording of all measured quantities relevant to processing, such as force, displacement, pressure, temperature, speed, frequency and torque. 

Due to its modularity the PME system enables measured signals from different transducer types to be conditioned uniformly. All measuring modules come with an LCD display, keypad and a CAN interface, 4 digital I/Os, changeover analog output (+/- 10V, 4...20 mA, +/- 20 mA), 4 limit value switches, 2 peak value stores and 4 parameter set memories: 

Our recommendation:MP85A/MP85ADP FASTpress - The amplifier for monitoring fitting processes

MP01 - Multichannel amplifier DC amplifier; 4 channels for voltage, current, and thermocouples or 2 channels for PT100 and resistors; Subcon5 connector; 0.1 accuracy class

MP30 - Single channel amplifier600 Hz carrier frequency amplifier for strain gage transducers; 0.05...20 Hz filter; autocalibration; 0.03 accuracy class

MP30DP - Single channel amplifier600 Hz carrier frequency amplifier with the same characteristics as MP30; however, with additional Profibus DP interface

MP55 - Single channel amplifier4.8 kHz carrier frequency amplifier for strain gage and inductive transducers in full and half bridge circuit; 0.05 ... 500 Hz filter; 0.1 accuracy class

MP55DP - Single channel amplifier4.8 kHz carrier frequency amplifier with the same characteristics as MP55; however, with additional Profibus interface

MP55IBS - Single channel amplifier4.8 kHz carrier frequency amplifier with the same characteristics as MP55; however, with additional Interbus S interface

MP60 - Single channel amplifier for incremental transducersFrequency measuring module for incremental transmitters and HBM torque flanges with frequency output; 0.05 accuracy class

MP60DP - Single channel amplifier for incremental transducersFrequency measuring module with the same characteristics as MP60; however, with additional Profibus DP interface

MP07 - Supply voltage module for type T10F-KF1 torque modulesSupply voltage module for type T10F KF1 torque transducers.

MP70DP - Profibus interfaceGateway from CANopen to Profibus DP; up to 8 PME channels can be connected via CAN; enables gateway functions and mathematical functions to be realized.

• Modular amplifier system consisting of self-supporting, intelligent modules for decentralist onsite measurement tasks, especially in production and assembly lines, large machines and for use in functional and performance testing set-ups
• Different types available for all common measurement quantities, e.g. SG transducers, inductive transducers, DC voltage, thermocouples, torque and speed transducers
• Manual operation of modules as well as operation via digital interface in conjunction with a PC incl. software possible
• Compact aluminium diecast housing for mounting on L-rails, along with industrial plug-and-socket connections and supply voltages (24V) simplifies installation and reduces expenditure on wiring
• Limit switches, peak value buffer and control inputs and outputs provided for monitoring tasks
• Bi-directional, error-free transfer of parameters and measured data via standardised CAN interface with CANopen protocol on each module
• Single- and multi-channel measuring modules also with Profibus DP and ISB interface

In addition to the industrial amplifiers HBM provides the appropriate ePLAN macros. They allow easy and error-free integration of the instruments in the project planning of the automation environment.

ePLAN Electric P8 is an engineering tool for modern CAE softwaresupported by a database and facilitates consistent project planning, documentation and administration of automation systems. ePLAN macros enable users to easily integrate the process controllers in their project planning. Parts data, drawings and pin assignments are available in ePLAN Electric P8 immediately after import of the macros.

The free macros are available on the documentation CD included in the process controllers' scope of supply and can also be downloadedhere.

The measuring converter type MC3 is used with strain gages in a full bridge circuit or with strain gage transducers to construct an uncomplicated and economical measuring system.

Suitable indicating equipments for connection to this system include digital indicators for switchboard installation. The MC3 supplies the bridge supply voltage of the transducer, amplifies the transducer output signal and outputs a DC voltage signal of -5V... 0 ... +5V proportional to the measured value.

A limit switch with open collector output can be adjusted over the range of 0 ... +5V.

When equipped with an optional final stage, an output current of 4mA ... 20 mA is available.

• Attractively priced carrier frequency amplifier for inductive and resistive transducers
• Two switchable measuring ranges
• Integral limit value switch
• Easy operation and installation
• Dustproof and hoseproof housing
• Option: +4...+20mA output stage