首页
产品中心
测量应用
行业方案
软件
服务与支持
联系我们
  • 力传感器
  • 称重传感器
    • 剪切梁式称重传感器
    • 扭环式称重传感器
    • 柱式称重传感器
    • 平台秤用称重传感器/单点称重传感器
    • 数字式称重传感器
    • 料仓和储罐称重模块
    • 安装附件和接线盒
      • CABA1
      • CABE2
      • Greenline
      • SB01A
      • VKD2R-8
      • VKK1-4 / VKK1R-4
      • VKK2-8, VKK2R-8
      • VKK2R-8 Ex
      • HLCB/PCX
    • 定制传感器的优势
    • AED_Panel32数据采集软件
    • S型称重传感器
  • 应变片
  • 数据采集系统
  • 测量放大器
  • 称重仪表
  • 软件
首页 > 
产品中心 > 
称重传感器 (Load Cell) > 
Aksesuarlar > 
VKK1-4 / VKK1R-4

VKK1-4 / VKK1R-4

VKK1-4 / VKK1R-4接线盒

并联连接多达四个称重传感器(VKK1-4)
通过集成电阻器网络进行角平衡
符合EMC标准 根据HBM屏蔽方法,符合EN45501
IP65防护等级 符合EN60529
VKK1R-4带不锈钢外壳

HBM的VKK1-4 / VKK1R-4接线盒可在6线电路中并联连接多达四个称重传感器。 HBM的屏蔽设计可满足EN 45 501的EMC要求。

接线盒还允许按常规方式通过屏蔽线连接屏蔽线。 通过这种方法,限制了EN 45 501的EMC防护,如果存在电磁干扰场,则可能导致测量错误。


HBM’s VKK1-4/VKK1R-4 junction box enables the parallel connection of up to four load cells in a 6-wire circuit. HBM’s shielding design provides EMC-proofing under EN 45 501.

The terminal boxes also allow the screen to be connected conventionally by means of the screen strands. With this method, EMC-proofing under EN 45 501 is restricted, which can lead to measurement errors when there are electromagnetic interference fields.

  EN
数据表 Data Sheet Data Sheet
安装使用说明 Mounting instructions Mounting instructions
CE认证 CE-Certificate Mounting instructions

Key Feature(s)

  • Parallel connection of up to four load cells (VKK1-4)
  • Corner balancing via integrated resistor network
  • EMC-proof acc. to EN45501 due to HBM shielding method
  • Protection class IP65 acc. to EN60529
  • VKK1R-4 with stainless housing

 

 

Material

Aluminum, nickel-plated brass, neoprene

Protection class

IP65

Temperature range (°C)

-20...+85 [-4...+185]

首页 >  产品中心 >  称重传感器 >  Aksesuarlar >  VKK1-4 / VKK1R-4
Copyright © 托驰(上海)工业传感器有限公司(www.sensor-hbm.com) GoogleSitemap
咨询热线:021-51069888 传真:021-51069009 地址:上海市嘉定区华江路348号707室
沪ICP备13027695号-16
  • Tweet